Research

The Polymer Centre closely cooperates with the University Institute.

Research teams of Polymer Centre and of the Centre of Polymer Systems
List of instruments
List of projects carried out by the Polymer Centre in 2017
Annual reports
Publications in 2016-2017



Research teams of the Polymer Centre and the Centre of Polymer Systems

Director of the research teams: Prof. Ing. Vladimír Sedlařík, Ph.D., in charge of management of the Centre of Polymer Systems

Research programme I. ‘Processing of Progressive Polymer Systems’:
Head of the research programme I.: doc. Ing. Tomáš Sedláček, Ph.D.

  • Research team: Processing of plastics

Senior researchers:

doc. Ing. Tomáš Sedláček, Ph.D, doc. Ing. Roman Čermák, Ph.D., Prof. Ing. Berenika Hausnerová, Ph.D.

Junior researchers:

Ing. Pavel Bažant, Ph.D., Ing. Lubomír Beníček, Ph.D., Ing. Ladislav Fojtl, Ph.D., Ing. Lenka Jelínková, Ph.D., Ing. Roman Kolařík, Ph.D., Ing. Tomáš Plachý, Ph.D., Ing. Martina Polášková, Ph.D.

Research staff (Ph.D. students):

Ing. Jakub Huba, Ing. Jiří Klofáč, Ing. Věra Klofáčová, Ing. Lukáš Maňas, Ing. Daniel Sanétrník

Technical support staff:

Jiřina Dohnalová, Bc. Robert Mostýn, Ing. Daniel Richter, Ing. Rostislav Tupý

  • Research team: Preparation of bioactive polymer systems

Senior researchers:

doc. Ing. Petr Humpolíček, Ph.D., doc. Ing. Věra Kašpárková, CSc., Ing. Pavel Kucharczyk, Ph.D., doc. Ing. Marián Lehocký, Ph.D.

Junior researchers:

Ing. Zdenka Capáková, Ph.D., Antonio Di Martino, M.Sc., Ing. Martina Hrabalíková, Ph.D., Kadir Özaltin, MSc., Mgr. Jiří Pacherník, Ph.D., Ing. Jana Sedlaříková, Ph.D., Ing. Petr Stloukal, Ph.D., doc. Ing. Pavel Valášek, CSc.

Research staff (Ph.D. students):

Kateryna Filatova, Ing. Pavlína Holčapková, Ing. Anna Hurajová, Ing. Nela Maráková, Ing. Nikola Mikušová, Ing. Lucie Nogolová, Mgr. Petra Rejmontová

Technical support staff:

Ing. Daniela Veselá

  • Research team: Surface treatment of materials

Senior researchers:

doc. Mgr. Aleš Mráček, Ph.D., Ing. Antonín Minařík, Ph.D., Ing. Petr Smolka, Ph.D.

Junior researchers:

Ing. Lenka Musilová, Ph.D., Ing. Martin Juřička, Ph.D., doc. RNDr. Petr Ponížil, Ph.D.

Research staff (Ph.D. students):

Ing. Erik Wrzecionko

  • Research team: Rubber processing and materials

Senior researchers:

Dr. Ing. Radek Stoček, doc. Ing. Zdeněk Dvořák, CSc.

Junior researchers:

Sanjoy Datta, Ph.D., Evghenii Harea, Ph.D., Ing. Martin Stěnička, Ph.D.

Research staff (Ph.D. students):

Ing. Eva Hnátková, Ing. Ondřej Kratina

Research programme II. ‘Advanced Polymer Composite Systems’:
Leader of the research programme II.: doc. Ing. et Ing. Ivo Kuřitka, Ph.D. et Ph.D.

  • Research team: Systems with sensoric properties       

Senior researcher:

doc. Ing. Petr Slobodian, Ph.D.

Junior researchers:

Ing. Jiří Matyáš, Ph.D., Ing. Robert Olejník, Ph.D.

  • Research team: Multifunctional nanomaterials           

Senior researchers:

doc. Ing. et Ing. Ivo Kuřitka, Ph.D. et Ph.D., Ing. Michal Machovský, Ph.D.

Junior researchers:

Ing. Barbora Hanulíková, Ph.D., Mgr. Kamil Maláč, Ph.D., Mgr. David Škoda, Ph.D., Mgr. Michal Urbánek, Ph.D., Ing. Pavel Urbánek, Ph.D., Mgr. Jan Vícha, Ph.D., Raghvendra Singh Yadav, Dr.

Research staff (Ph.D. students):

Ing. Milan Masař, Ing. Jan Mašlík, Ing. Lukáš Münster, Ing. Jakub Ševčík, Ing. Pavol Šuly

Technical support staff:

Ing. Jan Antoš

  • Research team: Composites with electric and magnetic properties

Senior researchers:

doc. Ing. Natalia Kazantseva, CSc., Ing. Miroslav Mrlík, Ph.D., doc. Ing. Jarmila Vilčáková, Ph.D.

Junior researchers:

Vladimir Artur Babayan, M.Sc. Ph.D., Tatiana Babkova, Ph.D., Ing. Katarína Borská, Ph.D., Dr. Ing. Constantin Bubulinca, Dr. Ing. Ying He, Prof. Dr. Ing. Qilin Cheng, Ing. Markéta Julinová, Ph.D., doc. Ing. Anežka Lengálová, Ph.D., Ing. Robert Moučka, Ph.D.

Research staff (Ph.D. students):

Ing. Martin Cvek, Haojie Fei, MSc., Ing. Josef Osička

  • Research team: Biocomposite systems

Senior researchers:

doc. Nabanita Saha, M.Sc., Ph.D., Prof. Ing. Petr Sáha, CSc.

Junior researchers:

Ganesh Shimoga Dinesh, Ph.D., Ramasubba Reddy Palem, Ph.D., Dr. Ayan Ray, Ing. Oyunchimeg Zandraa, Ph.D., Rushita Jaswant Shah, M.Sc., Ph.D.

List of instruments

List of instruments owned by the Polymer Centre

Particle size analyzer, measuring of zeta potential, Zetasizer Nano ZS, Malvern Instruments

Differential scanning calorimeter, DSC 1, Mettler Toledo

Differential scanning calorimeter, Perkin Elmer Pyris 1 DSC

Dynamic thermomechanical analyzer, DMA/SDTA861e, Mettler Toledo

Cooling three-roll calender machine 35/20

Impedance material analyzer, Agilent 4294A

Impedance material analyzer, Agilent E4991A

Incubator Memmert BE 500

Tensile machine, ZWICK 5113, Zwic

Single-channel generator working up to 30MHz, Generator 33512A, Agilent

Single worm extruders, EB 30 and EB 25, BOCO PARDUBICE s r.o.

Liquid chromatograph, HPLC Waters

Calorimeter for colour measurement, Spektrofotometr Lovibond RT850i

Laminar work box, BDK

Measuring of photoluminescence of liquid and solid samples, Fluorimetr FSL 920 Edinburgh FTIR

Double worm extruder, KETSE 20/40, Brabender GmbH

Microwave synthesis in an open system, RADAN s r.o.

Microwave synthesis in a closed system, Mars 5, CEM Corporation

Muffle furnace LAC LMH 07/12

N5230A PNA-L Network Analyzer

Steam sterilizer Tuttnauer 3870 M (Germany)

Programmable altimeters, KEITHLEY 2410 and 6517A

Device for measuring of hyperthermic heating, LAB-EHY-100 SA, Oncotherm

Raster electron microscope, VEGA II LMU, Tescan

Rotational viscometer, Rheometrics ARES

Rotational viscometers with electrorheological cell, Rheometer Bohlin Gemini CVOR

Sieve shaker for wet and dry sieving of materials, Retsch AS 200

Servohydraulic fatigue testing machine, INSTRON 8870, Instron

Spectrometer, Nicolet iS5

UV-VIS spectrometer, Helios Gamma, Thermo Scientific

Cutting mill, Retsch SM 100

TG – Setaram SetSys Evolution 1200 + DigiLab FT IR spectrometer Excalibur 3 000 + mass spectrometer AVX 600

Bath thermostat CC-308 B Pilot ONE HUBER

CD media tester, CD DIGITAL TESTER - QC – CDD 40

Ultrasonic homogenizer, UP 400S

Vector peripheral analyser E5071C, Agilent

Vibration magnetometer LAKE SHORE Model 7407

Viscometer for measuring of viscosity of liquids, Rheometer Visco 88 Cone and Plate

Injection molding machine, automatic blowing machine, double worm extruder MEt 180III, Mitsubishi

Injection machine for processing of highly filled polymer compounds, Arburg Allrounder 370S

Single worm and double worm extruder, Brabender Plasti-Corder

Injection machine for processing of highly filled polymer compounds, Babyplast 6/10P, Cronoplast S. L.

Blowing machine, GM 251, GDK s r.o.

Source of high voltage direct current, Trek 668 B-H w/IEEE

High-pressure capillary viscometer, Rheograph Göttfert 2001

High-pressure capillary viscometer, Rosand RH7-2

Educational software DIGIMAT

Amplifier 800A3A, AR Microwave/Instrumentation

List of instruments owned by the Centre of Polymer Systems and shared by the Polymer Centre

Mechanical operations, mixing

Automatic milling machine Minicut CR4U

Centrifuge Sorvall LYNX 4000

Centrifuge THERMO Multifuge X3R

Homogenizer UZ Sonopuls HD 2070 kit

Cooled centrifuge Thermoscientific HERAEUS MULTIFUGE X1R

Ball mill LAARMANN LAB WIZZ LMLW-320/2

Microtome Leica RM2265

Ultra Centrifugal Mill ZM 200 RETSCH

Planetary ball mill p-5/4 FRITSCH

Centrifuga EBA 21 Hettich

3D shaker GFL 3012

Homogenizer UZ Sonopuls HD 2070 kit

Evaporator - Heidolph LABOROTA 4011 DIGITAL

Notching device CEAST Manual Notchvis

Conditioning, thermal treatment

Biological incubator HERAcell 150i

Immersion cooler Huber TC 100NR

Incubator with orbital shaker GFL 3033

Incubator CLIMACELL, Type 111

Humidity chamber for stability testing DISCOVERY 250

Climate chambre Memmert Model HPP110

Thermostatic bath CC-K25 NR Huber

Freze drier CoolSafe 110-4 PRO

Transparent incubator STUART SI 60 D

Thermostat bath Huber CC-130A Visco 3

Thermostat CC-308B Pilot Huber

Thermostat Ministat 240-cc NR Huber

Surface modifications

Sputter coater Quorum Q300 TT

Device for plasma treatment of materials and powders with 40 kHz source

Device for plasma treatment of materials and powders with radiofrequency 13,56 MHz source

Device for plasma treatment of materials and powders with microwave 2,45 GHz source

Others

Simplicity Ultrapure Water Systems

Rotary oil vacuum pump (R 5, typ PB 0004 C)

Evaporator HEI-VAP HEIDOLPH Value G1

Equipment – analyses

Electric and magnetic properties of materials

Electrokinetic analysator

Electrometer/High Resistance Meter KEITHLEY 6517B

Mechanical properties

Falling weight impact tester CEAST 9340

Tear and Fatigue Analyzer

Tensile testing machine with tempered chamber

Density

Density/Specific Gravity/Concentration Meter DMA5000M

Tap density analyzer Quantachrome Autotap 02106-50-1

UltraFoam 1200e Automatic Gas Pycnometers

Molecular mass

Osmometer GONOTEC Membrane OSMOMAT 090 CellUnit

Gas permeability

Measurement of permeation properties VAC-V1

Volumetric analysis

Titrator D SCHOTT TitroLine Easy Modul 2

Surface properties

Atomic Force Microscope Dimension ICON

High Precision Surface Area and Pore Size Analyzer BELSORP-mini II

Profilometer mechanical and optical

Tensiometer Krűss K100

Particle size distribution

Particle size laser analyzer Malvern Mastersizer 3000

Rheology

Melt Indexer  (Extrusion Plastometer) Tinius Olsen MP600

Rotational rheometer Anton-Paar MCR 502

Vibro viscometer SV-10

High pressure capillary viscometer Rheograph 25-50

Rheo-microscopic system for AntonPaar MCR502

Imaging

Fluorescence-activated cell sorting BD FACSCanto II (Flow cytometry)

Cryo-ultramicrotome

Microbiological microscope Leica DM IL LED Fluo

Scanning electron microscope with autoemission cathode

Optical microscope Leica DVM2500 Digital Camera

Optical microscope N 400M

Table SEM

TEM microscope

Heating microscope EM201 with image analysis

Spectroscopy

Absorption spectrometer in ultraviolet, visible and NIR region

Absorption spectrometer in ultraviolet and visible region

Acoustic and Electroacoustic Spectrometer Model DT-1202

Raman microscope

Elemental Analysis

Elipsometer

Photometer INFINITE M200Pro NanoQuant

Benchtop NMR – PicoSpin 45

FT-IR spectrometer Nicolet 6700

FT-IR spectrometer Nicolet iS5

FTIR microscope

Impedance dielectric spectroscopy Novocontrol Concept 50

Solid samples test fixture for impedance spectroscopy Agilent 16451 B

Atomic absorption spectrometer (AAS) Agilent DUO 240FS/240Z/UltrAA

Separation methods / chromatography

Analyzer of CO2, O2, CH4 - Gas chromatograph (GC/FID, TCD, PDD, GC/MS) Shimadzu GCQP2010Ultra

Detector ELSD Waters 2424

Gel permeation chromatograph Agilent GPC PL-GPC220

Liquid chromatography system with mass spectrometry detection (Q-TOF) – Agilent ACCURATE MASS 6530 Q TOF LC/MS

Modular HPLC – Shimadzu Prominence LC 20AP/FRC-10A

RI detector (Refractive index detector) Waters 2414

Thermal analysis

Thermogravimetric analyzer TA Q500

Thermomechanical analyzer Mettler-Toledo TMA/SDTA 841

Biology

Bioreactor

Fluorescent microscope Olympus IX81

Equipment – processing

Extrusion/co-extrusion, compounders

Rubber co-extrusion line EMS-30

Film blowing co-extrusion line – up to 5 layers

Laboratory twin screw extruder - Scientific Twin Screw Extruder

Laboratory kneader for rubber compounds

Polymer melt filament laboratory line, model LBS-300

Multifunctional calendaring line LRMR-S-200/W with three-roll mill

Extruder LE45-30/CV

Disintegrators EM AH560-7,5 and EM-AH-260

Gravimetric feeding systém for 4 components, 2x main components pelets/powders and 2x side components pelets/powders

Water peletizer

Continuous drying system for hydroscopic materials

Volumetric feeding system

Injection moulding

Electric bi-component injection moulding machine (FB140T)

Mould for preparation of test specimens evaluating of separation of highly filled polymer systems

Set of sintering ovens for PIM

Moulds for test specimes

Others

Autoclaves Tuttnauer 3870 ELPV (2 pcs)

Glove-box

Hydraulic press FONTIJNE LabEcon 300

Microwave reactor ERTEC MFR13

Spin coater Laurell WS-650Mz-23NPP

Manual hot press

Manual cooling press

Water temperature control unit P160-9

List of projects carried out by the Polymer Centre in 2017

Projects funded by the Ministry of Education, Youth and Sports of the CR

ACTIVITY MOBILITY (7AMB) (6th FP of the European Community for Research, Technological Development and Demonstration Activities)

Czech-Austrian projects:

7AMB16AT033 Fiber Reinforced Polymers with Integrated Carbon Nanotubes Networks
Project investigator: doc. Ing. Petr Slobodian, Ph.D.
Implementation period: 2016 - 2017

Czech-Polish projects:

7AMB16PL070 Novel processing techniques of biodegradable polymers for biomedical applications
Project investigator: Prof. Ing. Vladimír Sedlařík, Ph.D.
Implementation period: 2016 - 2017

COST CZ Programme

COST MP Calcium Rich Polymeric Scaffolds for Bone Tissue Engineering
Project investigator: doc. Nabanita Saha, M.Sc., Ph.D.
Implementation period: 2013 - 2017

Projects funded by the Technology Agency of the CR

TE01020216 - Centre of advanced polymer and composite materials (Competence Centres) in cooperation with 5 companies (Fatra a.s., Spur a.s., Quinn Plastics s.r.o., Zlin Precision s.r.o. and 5M s.r.o.)
Project investigator: Prof. Ing. Petr Sáha, CSc. (doc. Ing. Tomáš Sedláček, Ph.D.)
Implementation period: 1 April 2012 – 31 December 2019

Projects funded by the Ministry of Agriculture of the CR

QJ1310254 - Research into the use of whey as dairy industry waste product, the production of antimicrobial compounds for the modification of hydrophilic polymer systems with the use in cosmetic and medical applications (in cooperation with the Dairy Research Institute s.r.o. and Chiromed group s.r.o.)
Project investigator: Prof. Ing. Vladimír Sedlařík, Ph.D.
Implementation period:  1 January 2013 – 31 December 2017

Projects funded by the Ministry of Industry and Trade of the CR

TRIO

TBU acting as a co-investigator

FV10756 Development of polymer carriers in sub-micro and nano-forms
Project investigator on behalf of TBU: Prof. Ing. Vladimír Sedlařík, Ph.D.’
Implementation period: 2016 - 2020

Projects Funded by the Czech Science Foundation

GA16-05886S Investigation the Effect of Polymer Melt Shear and Elongational Rheology on Production Stability of Meltblown Nanofibers and Films
Project investigator: Martin Zatloukal
Implementation period: 2016 - 2018

Annual reports

2013
2012
2011
2010 [106 KiB]

Publications in 2016-2017

30/11/2016 – 28/07/2017

PAPERS IN SCIENTIFIC JOURNALS

[1]MrlíkMiroslav(90); PavlínekVladimír(10). Magnetorheological suspensions based on modified carbonyl iron particles with an extremely thin poly(n-butyl acrylate) layer and their enhanced stability properties. Smart Materials and Structures, 2016, Volume 25, No. 8, p. Pages not specified. ISSN 0964-1726.CD - Makromolekulární chemie

[2]SlobodianPetr(65); ŘíhaPavel(5); OlejníkRobert(10); MatyášJiří(10); 
MachovskýMichal(10). Pre-Strain Stimulation of Electro-Mechanical Sensitivity of Carbon Nanotube Network/Polyurethane Composites. IEEE Sensors Journal, 2016, Volume 16, No. 15, p. 5898-5903. ISSN 1530-437X.JI - Kompositní materiály

[3]SlobodianPetr(80); ŘíhaPavel(5); OlejníkRobert(10); BenlikayaRuhan(5). Analysis of sensing properties of thermoelectric vapor sensor made of carbon nanotubes/ethylene-octene copolymer composites. Carbon, 2016, Volume 110, No. Not specified, p. 257-266. ISSN 0008-6223.JI - Kompositní materiály

[4]DrábekJiří(50); ZatloukalMartin(50). Evaluation of thermally induced degradation of branched polypropylene by using rheology and different constitutive equations. Polymers, 2016, Volume 8, No. 9, p. Pages not specified. ISSN 2073-4360.CD - Makromolekulární chemie

[5]MokrejšPavel(65); JanáčováDagmar(20); BeníčekLubomír(5); Plachý
Tomáš(5); SvobodaPetr(5). Optimising Conditions for Preparing Collagen-type Hydrolysates. Journal of the Society of Leather Technologists and Chemists, 2016, Volume 100, No. 3, p. 114-121. ISSN 0144-0322.CE - Biochemie

[6]RejmontováPetra(10); CapákováZdenka(15); MikušováNikola(5); 
MarákováNela(5); KašpárkováVěra(20); LehockýMarián(10); HumpolíčekPetr(35). Adhesion, proliferation and migration of NIH/3T3 cells on modified polyaniline surfaces. International Journal of Molecular Sciences, 2016, Volume 17, No. 9, p. Pages not specified. ISSN 1422-0067.JJ - Ostatní materiály

[7]PalemRamasubba Reddy(30); Shimoga DineshGanesh(30); SahaNabanita(15); ZandraaOyunchimeg(15); SáhaPetr(10). Ecofriendly Synthesis of Silver Nanoparticles from Garden Rhubarb (Rheum rhabarbarum). Journal of Nanotechnology, 2016, Volume 2016, No. Not specified, p. 1-9. ISSN 1687-9503.CA - Anorganická chemie

[8]HanulíkováBarbora(50); KuřitkaIvo(40); UrbánekPavel(10). Effect of backbone conformation and its defects on electronic properties and assessment of the stabilizing role of π-π interactions in aryl substituted polysilylenes studied by DFT on deca[methyl(phenyl)silylene]s. Chemistry Central Journal, 2016, Volume 10, No. 1, p. Pages not specified. ISSN 1752-153X.CE - Biochemie

[9]Shimoga D.Ganesh(60); SahaNabanita(20); KucharczykPavel(10); SáhaPetr(10). N-[2-(Cyclohexylamino)-2-oxoethyl]-N-(4-octyloxy) phenyl-prop-2-enamide. journal Molbank, 2016, Volume 4, No. 2016, p. 1-5. ISSN 1422-8599.CC - Organická chemie

[10]BrannáPetra(5); ČernochováJarmila(5); RouchalMichal(20); 
Kulhánek
Petr(5); BabinskýMartin(5); MarekRadek(5); NečasMarek(5); 
KuřitkaIvo(5); VíchaRobert(45). Cooperative Binding of Cucurbit[n]urils and β-Cyclodextrin to Heteroditopic Imidazolium-Based Guests. Journal of Organic Chemistry, 2016, Volume 81, No. 20, p. 9595-9604. ISSN 0022-3263.CC - Organická chemie

[11]JunkarIta(10); KulkarniMukta(5); DrašlerBarbara(5); RugeljNeža(5); 
Recek
Nina(5); DrobneDamjana(5); KövačJanez(5); HumpolíčekPetr(40); 
Iglič
Aleš(10); MozetičMiran(10). Enhanced biocompatibility of TiO2 surfaces by highly reactive plasma. Journal of Physics D: Applied Physics, 2016, Volume 49, No. 24, p. Pages not specified. ISSN 0022-3727.JJ - Ostatní materiály

[12]HnátkováEva(35); SanétrníkDaniel(20); PataVladimír(15); 
Hausnerová
Berenika(15); DvořákZdeněk(15). Mold Surface Analysis after Injection Molding of Highly Filled Polymeric Compounds. Manufacturing Technology, 2016, Volume 16, No. 1, p. 86-90. ISSN 1213-2489.CE - Biochemie

[13]SwilemAhmed E.(5); LehockýMarián(60); HumpolíčekPetr(10); 
Kuceková
Zdenka(5); JunkarIta(5); MozetičMiran(5); HamedAshraf A.(5); 
NovákIgor(5). Developing a biomaterial interface based on poly(lactic acid) via plasma-assisted covalent anchorage of D-glucosamine and its potential for tissue regeneration. Colloids and Surfaces B-Biointerfaces, 2016, Volume 148, No. Not specified, p. 59-65. ISSN 0927-7765.JK - Koroze a povrchové úpravy materiálu

[14]ZatloukalMartin(100). Measurements and modeling of temperature-strain rate dependent uniaxial and planar extensional viscosities for branched LDPE polymer melt. Polymer, 2016, Volume 104, No. Not specified, p. 258-267. ISSN 0032-3861.CD - Makromolekulární chemie

[15]MatyášJiří(45); MünsterLukáš(10); OlejníkRobert(5); VlčekKarel(5); 
SlobodianPetr(10); KrčmářPetr(5); UrbánekPavel(10); KuřitkaIvo(10). Antenna of silver nanoparticles mounted on a flexible polymer substrate constructed using inkjet print technology. Japanese Journal of Applied Physics, 2016, Volume 55, No. 2, p. 1 - 4.
ISSN 0021-4922.JI - Kompositní materiály

[16]MrlíkMiroslav(30); IlčíkováMarkéta(20); CvekMartin(30);
PavlínekVladimír(5); ZahoranováAnna(5); KronekováZuzana(5); 
Kasák
Peter(5). Carbonyl iron coated with a sulfobetaine moiety as a biocompatible system and the magnetorheological performance of its silicone oil suspensions. RSC Advances: an international journal to further the chemical sciences, 2016, Volume 6,
No. 39, p. 32823-32830. ISSN 2046-2069.JI - Kompositní materiály

[17]DvořákZdeněk(30); HnátkováEva(50); SedlačíkMichal(20). Mold surface contamination during polymer processing. Manufacturing Technology, 2016, Volume 16,
No. 1, p. 63-69. ISSN 1213-2489.JI - Kompositní materiály

[18]KucekováZdenkaRejmontováPetraHumpolíčekPetrKašpárková
VěraBoberPatrycjaSáhaPetrStejskalJaroslav. Cytotoxicity of poly(p-phenylenediamine). Chemical Papers, 2016, Volume Not specified, No. Not specified, p. 1-6.
ISSN 0366-6352.CD - Makromolekulární chemie

[19]MikušováNikolaHumpolíčekPetrRůžičkaJanCapákováZdenka
JanůKristýnaKašpárkováVěraBoberPatrycjaStejskalJaroslav
KoutnýMarekFilatovaKaterynaLehockýMariánPonížilPetr. Formation of bacterial and fungal biofilm on conducting polyaniline. Chemical Papers, 2016, Volume Not specified, No. Not specified, p. 1-8. ISSN 0366-6352.

[20]Di MartinoAntonio(50); PavelkováAlena(10); MaciulyteSandra(5); 
BudrieneSaulute(5); SedlaříkVladimír(30). Polysaccharide-based
nanocomplexes for co-encapsulation and controlled release of 5-Fluorouracil and Temozolomide. European Journal of Pharmaceutical Sciences, 2016, Volume 92, No. Not specified, p. 276-286. ISSN 0928-0987.CD - Makromolekulární chemie

[21]StloukalPetr(65); JandíkováGabriela(5); KoutnýMarek(15); 
SedlaříkVladimír(15). Carbodiimide additive to control hydrolytic stability and biodegradability of PLA. Polymer Testing, 2016, Volume 54, No. Not specified, p. 19-28.
ISSN 0142-9418.CD - Makromolekulární chemie

[22]CvekMartin(55); MrlíkMiroslav(35); PavlínekVladimír(10). A rheological evaluation of steady shear magnetorheological flow behavior using three-parameter viscoplastic models. Journal of Rheology, 2016, Volume 60, No. 4, p. 687-694. ISSN 0148-6055.BK - Mechanika tekutin

[23]HubaJakub(40); SanétrníkDaniel(10); HnátkováEva(5); 
Hausnerová
Berenika(40); DvořákZdeněk(5). New application of powder injection molded product in medical field. Manufacturing Technology, 2016, Volume 16, No. 1,
s. 94-98. ISSN 1213-2489.CE - Biochemie

[24]OzaltinKadir(20); LehockýMarián(60); HumpolíčekPetr(10); 
PelkováJana(5); SáhaPetr(5). A new route of fucoidan immobilization on low density polyethylene and its blood compatibility and anticoagulation activity. International Journal of Molecular Sciences, 2016, Volume 17, No. 6, p. Pages not specified. ISSN 1422-0067.JK - Koroze a povrchové úpravy materiálu

PAPERS IN CONFERENCE PROCEEDINGS

[25]HanulíkováBarboraKuřitkaIvoUrbánekPavelKafkaStanislav;
ProislKarel. Benzo-1,3-oxazin-4-one derivatives as UV absorbers: NMR and UV-VIS DFT study. In 2017,

[26]HrabalíkováMartinaSedlaříkVladimír. Microparticles based on polylactide and poly(methyl methacrylate) blends for controlled release of hydrophobic bioactive agents. In 2017,

[27]NogolováLucieSedlaříkVladimír. The effect of nisin/polyethylene glycol in cosmetic products. In 2017,

[28]MatyášJiří(20); OlejníkRobert(20); SlobodianPetr(20); Münster
Lukáš(20); UrbánekPavel(20). Mikropásková anténa na bázi nanočástic stříbra natištěná na polymerním substrátu. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JI - Kompositní materiály

[29]ÖzaltinKadir(20); LehockýMarián(20); HumpolíčekPetr(20); 
SáhaPetr(20); PelkováJana(20). In vitro anticoagulation activity of Fucoidan from Fucus vesiculosus coated low density polyethylene. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CE - Biochemie

[30]MoučkaRobertSedlačíkMichalCvekMartinPavlínekVladimír.
Dielectric behavior of sructured magnetorheological elastomers. In 2017,

[31]VíchaJan(90); MünsterLukáš(5); KuřitkaIvo(5). INVESTIGATION OF CROSSLINKING IN POLY(VINYL)ALCOHOL HYDROGELS BY CP-MAS 13C NMR SPECTROSCOPY. In 31st Central European NMR meeting Valtice. Brno :
Stuare, 2016, p. C-8. ISBN 978-80-86441-47-4.CA - Anorganická chemie

[32]SahaNabanita(25); Akkaya KezbanKezban(20); Ramasubba ReddyPalem(25); BelikayaRuhan(20); SáhaPetr(10). Biopolymer based composite hydrogel as food packaging material. In 46th IUPAC World Polymer congress MACRO 2016. Turkey : MACRO 2016, 2016, p. 352. CE - Biochemie

[33]MukaidaJun(5); NishitaniYosuke(5); YamanakaToshiyuki(5); 
KajiyamaTetsuto(5); KitanoTakeshi(80). Influence of types of alkali treatment on the mechanical properties of hemp fiber reinforced polyamide 1010 composites. In AIP Conference Proceedings. Melville : American Institute of Physics, 2016, p.
Not specified. ISSN 0094-243X. ISBN 978-0-7354-1441-9.JI - Kompositní materiály

[34]Pertegás, p. Lloret(45); SlobodianPetr(15); MatyášJiří(15); 
OlejníkRobert(15); SchledjewskiR.(10). Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection.
In International workshop on the application of nanomaterials. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-1. ISBN 978-80-7454-622-8.JI - Kompositní materiály

[35]CvelbarUroš(35); SlobodianPetr(30); KondoHiroki(15); 
Sekine
Makoto(10); HoriMasaru(10). Plasma deposited carbon nanowalls for detection of organic vapours. In International workshop on the application of nanomaterials, 15.-16. 11 2016 Zlín. Zlin : Tomas Bata University, 2016,
p. 1-1. ISBN 978-80-7454-622-8.JB - Senzory, čidla, měření a regulace

[36]HolčapkováPavlína(50); VojtáškováKateřina(40); SedlaříkVladimír(10). Binární polymerní systémy PLA/PEG pro imobilizaci bakteriocinů. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[37]ZatloukalMartin(50); BarboříkTomáš(50). Effect of Extensional Viscosity, Elasticity and Die Exit Stress State on Neck-in Phenomenon during Extrusion Film Casting: Theoretical Study. In Annual Technical Conference - ANTEC, Conference Proceedings. Indianapolis, Indiana, USA : Society of Plastic Engineers,
2016, p. 715-719. ISBN 978-0-692-71961-9.JP - Průmyslové procesy a zpracování

[38]MasařMilan(40); UrbánekMichal(5); AntošJan(5); 
MachovskýMichal(40); KuřitkaIvo(10); UrbánekPavel. Nová metoda pro on-line měření fotokatalytické aktivity práškových vzorků. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JA - Elektronika a optoelektronika, elektrotechnika

[39]MünsterLukáš(70); KuřitkaIvo(30). Vliv koncentrace katalyzačního systému a teploty sušení na síťování PVA/DAC směsi. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[40]ŠtoplováPetraHrabalíkováMartinaKucharczykPavelSedlaříkVladimír. Preparation and characterization of biodegradable polyactic acid based sponges via spray coagulation technique. In 2017,

[41]Ramasubba ReddyPalem(30); Ganesh D.Shimoga(40); SahaNabanita(10); SáhaPetr(10); KronekJuraj(10). Synthesis and characterization of PIPOx-co-PVP copolymers. In BIMac 2016. Bratislava : Polymer institute of the Slovak Academy of sciences, 2016, p. 40. ISBN 978-80-89841-01-1.CE - Biochemie

[42]ZandraaOyunchimeg(50); SahaNabanita(20); Shimoga D.Ganesh(10); Ramasubba ReddyPalem(10); SáhaPetr(10). Bacterial Cellulose: An excellent biobased polymer produced from apple juice. In MoDest 2016. Krakow, Poland : MoDest 2016, 2016, p. 237. ISBN 978-83-925627-3-3.JI - Kompositní materiály

[43]NogolováLucie(50); Kolářová RaškováZuzana(30); SedlaříkVladimír(20). Konzervační systém pro bioadhezivní polymerní matrice s obsahem nisinu. In Plastko 2016. Zlín : not specified, 2016, p. 316-325. ISBN 978-80-7454-590-0.JI - Kompositní materiály

[44]SlobodianPetr(60); MatyášJiří(10); OlejníkRobert(10); Pertegás, p. Lloret(10); SchledjewskiR.(10). Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JB - Senzory, čidla, měření a regulace

[45]SlobodianRostislav(30); OlejníkRobert(25); SlobodianPetr(25); 
MatyášJiří(20). Detekce par organických rozpouštědel pomocí vrstvy z polymerního kompozitu obsahujícího uhlíkové nanotrubice. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JB - Senzory, čidla, měření a regulace

[46]BažantPavel(60); KlofáčJiří(15); MünsterLukáš(15); KuřitkaIvo(10). Antibacterial powders prepared by microwave hydrothermal assisted synthesis for medical application. In Nanoscience and Nanotechnology. Rosemead, CA :
Scientific & Academic Publishing, 2016, p. 88-91. ISSN 2163-2588. JI - Kompositní materiály

[47]OlejníkRobert(35); SlobodianPetr(30); MatyášJiří(30); BabarDipak Gorakh(5). High elastic polyurethane/carbon nanotube composite laminate
for structure health monitoring by gain shifting of antenna sensing element. In IOP Conference Series: Materials Science and Engineering. Bristol : Institute of Physics Publishing Ltd., 2016, p. Pages not specified. ISSN 1757-8981. JI - Kompositní materiály

[48]HausnerováBerenika(60); KašpárkováVěra(35); HnátkováEva(5).
Rheological and thermal performance of newly developed binder systems for ceramic injection molding. In Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society. Melville : American Institute of Physics, 2016, p. Pages not specified. ISSN 0094-243X. ISBN 978-0-7354-1309-2.CD - Makromolekulární chemie

[49]HnátkováEva(50); JelínkováLenka(30); MráčekAleš(15); 
FrýzaLukáš(5). Sušení polymerních materiálů s ohledem na kvalitu pohledových vstřikovaných dílů. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[50]KratinaOndřej(50); StočekRadek(50). Fatigue behavior of filled rubber material. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[51]Di MartinoAntonioGuselnikovaOlga A.TrusovaMartina E.PostnikovPavel S.KucharczykPavelSedlaříkVladimír. Hybrid iron oxide based nanoparticles as delivery system for anticancer drugs doxorubicin. In 2017,

[52]VíchaJanMünsterLukášKlofáčJiříMasařMilanKuřitkaIvo.
Investigation of structure and stability of aldehyde cellulose. In 2017,

[53]OsičkaJosef(30); CvekMartin(20); MrlíkMiroslav(10); Ilčíková
Markéta(10); PavlínekVladimír(5); MosnácekJaroslav(5). Light-induced
and sensing capabilities of SI-ATRP modified graphene oxide particles in elastomeric matrix. In 2017,

[54]RayAyan(50); SahaNabanita(30); SáhaTomáš(10); SáhaPetr(10). BIOMINERALIZED MAGNETIC HYDROGEL: AN APPLICATION TOWARDS BIOMEDICINE. In NEWGEN Zlín worskhop and WG meeting on hydrogel/
biomineralized biomaterial for bone tissues regeneration
. Zlín :
Tomas Bata University in Zlin, 2016, p. 27. ISBN 978-80-7454-623-5.CE - Biochemie

[55]Di MartinoAntonio(50); SedlaříkVladimír(20);
GuselnikovaA. Olga(10); KurtukovV. Viktor(10); Postnikov, p. Pavel(10). DEVELOPMENT OF THERANOSTIC AGENTS BASED ON IRON OXIDE-GADOLINIUM-CHITOSAN FOR CONTROLLED RELEASE OF DOXORUBICIN. In Nanocon 2016. Ostrava : Tanger spol. s r. o., 2016, p. not specified. ISBN 978-80-87294-68-0.CE - Biochemie

[56]FeiHaojie(60); SahaNabanita(30); SáhaPetr(10). Bacterial cellulose/carbon nanotube/manganese dioxide composite electrode for flexible supercapacitors. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati
ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CG - Elektrochemie

[57]ZatloukalMartin(50); DrábekJiří(50). Evaluation of Branched Polypropylene Degradation by Using Different Constitutive Equations. In Annual Technical Conference - ANTEC, Conference Proceedings. Indianapolis, Indiana, USA : Society of Plastic Engineers, 2016, p. 118-122. ISBN 978-0-692-71961-9.JP - Průmyslové procesy a zpracování

[58]MrlíkMiroslavOsičkaJosefIlcikovaMarketaPavlínek
VladimírMosnacekJaroslav. Smart composites based on controllably grafted graphene oxide particles and elastomeric matrix with tunable seensing capability. In 2017,

[59]Kolářová RaškováZuzana(50); SedlaříkVladimír(10); KousalJaroslav(20);
MelnichukIurii(20). Difuze nisinu filmem plazmového polymeru na bázi PEO. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně,
2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[60]ZandraaOyunchimeg(50); SahaNabanita(20); SáhaTomáš(10); Shimoga DineshGanesh(5); PalemRamasubba Reddy(5); SáhaPetr(10). COMPARATIVE STUDY OF “MG GEL” and “GG–DSS GEL” FOR ITS APPLICATION IN HEALTH CARE INDUSTRY. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CE - Biochemie

[61]PlachýTomáš(30); HrabcováLucie(30); KadlčákJakub(15);
KratinaOndřej(15); PavlínekVladimír(10). Sponge-like magnetic material based on EPDM rubber filled with carbonyl iron particles. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[62]ItagakiKaito(20); NishitaniYosuke(20); KitanoTakeshi(40);
EguchiKenichiro(20). Tribological Properties of Nanosized Calcium
Carbonate Filled Polyamide 66 Nanocomposites. In Proceedings Of Pps-31:
The 31St International Conference Of The Polymer Processing Society
. Melville : American Institute of Physics, 2016, p. Pages not specified. ISSN 0094-243X. ISBN 978-0-7354-1360-3.JI - Kompositní materiály

[63]StloukalPetr(60); SedlaříkVladimír(20); ChodákIvan(10);
NovákIgor(10). The effect of siloxane based plasma deposited layer on the release of Temozolomide from biodegradable polymers. In Abstract book - 3rd International Conference on Bio-based Polymers and Composites. Budapešť :
Department of Physical Chemistry and Materials Science, Budapest University of Technology and Economics, 2016, p. 81-82. ISBN 978-0-12-763952-9.CE - Biochemie

[64]CvekMartinMrlíkMiroslavIlcikovaMarketaSedlačíkMichal;
MosnacekJaroslavPavlínekVladimír. Magnetorheological elastomers with tailored performance and stability properties based on multifunctional core-shell particles with different shell thickness prepared via SI-ATRP. In 2017,

[65]FeiHaojie(50); SahaNabanita(10); ZandraaOyunchimeg(10);
MoučkaRobert(5); KazantsevaNatalia(10); SáhaPetr(5); WangGengchao(5);
BaoHua(5). In situ preparation of bacterial cellulose reinforced hydrogel electrolyte for flexible supercapacitors. In Nanocon 2016. Ostrava : Tanger spol. s r. o., 2016, p. 1-6. ISBN 978-80-87294-68-0.CE - Biochemie

[66]LehockýMarián(55); HumpolíčekPetr(10); SedlaříkVladimír(5);
SáhaPetr(5); UrbánekMichal(5); SwilemAhmed(5); JunkarIta(5);
MozetičMiran(5); KucekováZdenka(5). Development of a glycosylated poly(lactic acid) surface using plasma technology for tissue engineering applications. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JK - Koroze a povrchové úpravy materiálu

[67]NishitaniYosuke(5); MukaidaJun(5); YamanakaToshiyuki(5);
 KajiyamaTetsuto(5); KitanoTakeshi(80). Effect of processing sequence on the dynamic viscoelastic properties of ternary biomass composites (Hemp fiber/PA1010/PA11E) in the molten state. In AIP Conference Proceedings. Melville :
American Institute of Physics, 2016, p. Not specified. ISSN 0094-243X. ISBN 978-0-7354-1441-9.CD - Makromolekulární chemie

[68]ŠevčíkJakub(25); UrbánekPavel(25); ŠulyPavol(10); UrbánekMichal(10);
MašlíkJan(10); AntošJan(10); KuřitkaIvo(10). Enhanced electrical and optical properties of organic light emitting devices. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.BH - Optika, masery a lasery

[69]SlobodianPetr(70); ŘíhaPavel(10); OlejníkRobert(10); BenlikayaRuhan(10). Organic vapour sensing and thermoelectric properties of carbon nanotubes/ethylene-octene copolymer composites combined in a thermopile. In International workshop
on the application of nanomaterials
. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-1. ISBN 978-80-7454-622-8.JI - Kompositní materiály

[70]NishitaniYosuke(5); HasumiMegumi(5); KitanoTakeshi(90). Influence of Silane Coupling Agents on the Rheological Behavior of Hemp Fiber Filled Polyamide 1010 Biomass Composites in Molten State. In Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society. Melville : American Institute of Physics, 2015, p. Pages not specified. ISSN 0094-243X. ISBN 978-0-7354-1309-2.CD - Makromolekulární chemie

[71]HundákováMariannaValáškováMartaPazdzioraErich;
SlobodianPetrKimmerDušan. Preparation and some properties of polyethylene/vermiculite nanocomposites. In NANOCON 2012. Ostrava :
Tanger spol. s r. o., 2012, p. 86-91. ISBN 978-80-87294-32-1.

[72]ZandraaOyunchimeg(50); SahaNabanita(25); SáhaTomáš(10);
KitanoTakeshi(5); SáhaPetr(10). Effect of salt concentration and temperature on the rheological properties of guar gum-dead sea salt gel. In AIP Conference Proceedings. Melville : American Institute of Physics Publising Inc., 2016, s.
Not specified. ISSN 0094-243X. ISBN 978-0-7354-1441-9.CD - Makromolekulární chemie

[73]RayAyan(50); SahaNabanita(30); SáhaTomáš(10); SáhaPetr(10). In situ synthesis of biomineralized magnetic nanoparticle within hydrogel. In Nanocon 2016. Ostrava : Tanger spol. s r. o., 2016, p. 1-6. ISBN 978-80-87294-68-0.CE - Biochemie

[74]BandyopadhyaySmarak(50); ZandraaOyunchimeg(15); Jelínková,
Lenka(10); SahaNabanita(15); SáhaPetr(10). Bacterial cellulose from apple juice medium: a sustainable raw material for hydrogel. In NEWGEN Zlín worskhop and WG meeting on hydrogel/biomineralized biomaterial for bone tissues regeneration. Zlín : Newgen COST, 2016, p. 19. ISBN 978-80-7454-623-5.JI - Kompositní materiály

[75]SanétrníkDaniel(50); SedláčekTomáš(25); PastorekMiroslav(25). Viskoelastické chování vysoce plněných paropropustných polymerních fólií. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[76]SlobodianPetr(35); MatyášJiří(30); OlejníkRobert(20); PertegásSilvia Lloret(5); SchledjewskiRalf(5); ŘíhaPavel(5). Multi-functional polymer composites with integrated nanostructured carbon nanotubes as sensing films. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JB - Senzory, čidla, měření a regulace

[77]NakamuraKeisuke(5); NaruseNoritada(5); NishitaniYosuke(5);
KitanoTakeshi(85). Fabrication of micro-structured surface of plants-derived polyamide using femtosecond laser and their frictional properties. In AIP Conference Proceedings. Melville : American Institute of Physics, 2016, p. Not specified. ISSN 0094-243X. ISBN 978-0-7354-1441-9.CD - Makromolekulární chemie

[78]MatyášJiří(70); OlejníkRobert(20); SlobodianPetr(5); Spitalsky,
Zdenko(5). Flexible microstrip antenna based on graphene/styrene-isoprene-styrene copolymer composite thin layer deposited on PET substrate for VOC detection. In International workshop on the application of nanomaterials. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-1. ISBN 978-80-7454-622-8.JI - Kompositní materiály

[79]SlobodianPetr(70); ŘíhaPavel(10); OlejníkRobert(20). Permeation of VOC vapours through carbon nanotube network membranes controlled electrically. In International workshop on the application of nanomaterials. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-1. ISBN 978-80-7454-622-8.JI - Kompositní materiály

[80]OlejníkRobert(40); BabarDipak Gorakh(5); SlobodianPetr(30); MatyášJiří(25). Sensing element for detection of polar organic vapours on the base of polyaniline-composite - Effect of substrate surface area. In IOP Conference Series: Materials Science and Engineering.Bristol : Institute of Physics Publishing Ltd., 2016, p. Pages not specified. ISSN 1757-8981. JI - Kompositní materiály

[81]JurčaMarek(40); VilčákováJarmila(30); KazantsevaNatalia(20);
BažantPavel(10). Vliv dikumyl peroxidu na přípravu a vlastnosti epoxid-silikonových směsí. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[82]PastorekMiroslav(50); SedláčekTomáš(25); SanétrníkDaniel(25). Tepelná stabilita povrchově modifikovaných vápenců určených pro paropropustné fólie. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[83]Shimoga D.Ganesh(35); Ramasubba ReddyPalem(30); SahaNabanita(25); SáhaPetr(10). Green approach to synthesize silver nanoparticles from stem extract of garden rhubarb: evaluation of their stability and dielectric performances. In Nanocon 2016. Ostrava : Tangerspol. s r. o., 2016, p. 1-6. ISBN 978-80-87294-68-0.CE - Biochemie

[84]Shimoga D.Ganesh(60); SahaNabanita(20); SáhaPetr(10); ZuckermannN. Ronald(10).
An attempt to use egg shell membrane as a biotemplate for grafting ultrashort peptoids. In BIMac 2016. Bratislava : Polymer institute of the Slovak Academy of sciences, 2016,
s. 60. ISBN 978-80-89841-01-1.CE - Biochemie

[85]BasuProbal(50); SahaNabanita(40); SáhaPetr(10). Functional significance of three dimensional hydrogel scaffolds in bone tissue engineering - a review. In NEWGEN Zlín worskhop and WG meeting on hydrogel/biomineralized biomaterial for bone tissues regeneration. Zlín : Newgen COST, 2016, p. 22. ISBN 978-80-7454-623-5.
JI - Kompositní materiály

[86]NogolováLucie(60); Kolářová RaškováZuzana(10); ŠalakováAlexandra(10);
 PantůčekJiří(10); Sedlařík, Vladimír(10). Studie použití nisinu
pro mikrobiologickou stabilizaci masťových základů. In 104. Kosmetologický seminář Zámek Valeč 2016. not specified : Kosmetologickáspolečnost České republiky, 2016, p. 100-103. ISBN 978-80-904679-9-6.EE - Mikrobiologie, virologie

[87]StloukalPetr(25); SedlaříkVladimír(25); TupýMichal(25); ZetkováKateřina(25). Vliv ftalocyaninů na vytvrzovací reakce metakrylátového laku. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[88]MikawaKazuma(5); HoshikawaAkinori(5); NishitaniYosuke(5); Shimizu,
Tsubasa(5); TakahashiEiichi(5); KitanoTakeshi(75). Influence of nut shell powder content on the tribological properties of recycled polyolefin composites. In AIP Conference Proceedings. Melville : American Institute of Physics, 2016, p. Not specified. ISSN 0094-243X. ISBN 978-0-7354-1441-9.CD - Makromolekulární chemie

[89]SlobodianPetr(30); OlejníkRobert(25); MatyášJiří(25); PertegásSilvia Lloret(10); SchledjewskiRalf(10). Enhanced strain detection ability of epoxy/glass fibres composite with embedded carbon nanotubes network by KMnO4 oxidation. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016,
p. not specified. ISBN 978-80-7454-590-0.JI - Kompositní materiály

[90]FeiHaojie(50); SahaNabanita(15); KazantsevaNatalia(15); SáhaPetr(5);
WangGengchao(5); BaoHua(10). A strong and sticky hydrogel electrolyte for
flexible supercapacitors. In PROCEEDINGS OF THE REGIONAL CONFERENCE
GRAZ 2015 – POLYMER PROCESSING SOCIETY PPS: Conference Papers
.
Melville : AIP Publishing, 2016, p. 1-5. ISSN 0094-243X. ISBN 978-0-7354-1441-9.JE - Nejaderná energetika, spotřeba a užití energie

[91]HumpolíčekPetr(20); CapákováZdenka(20); KašpárkováVěra(20);
RejmontováPetra(20); MikušováNikola(10); MarákováNela(10). Conductive nanostructured surfaces. In International workshop on the application of nanomaterials. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-2. ISBN 978-80-7454-622-8.CD - Makromolekulární chemie

[92]PelíškováMichaela(20); SlobodianPetr(20); SedlaříkVladimír(20);
ZatloukalMartin(20); KuřitkaIvo(20). Antibacterial surface on polyurethane sheets by Ag/ZnO nanoparticles. In International workshop on the application of nanomaterials. Zlín : Tomas Bata University, Centre of Polymer Systems (CPS), University Institute, 2016, p. 1-1. ISBN 978-80-7454-622-8.JI - Kompositní materiály

[93]SlobodianPetr(60); OlejníkRobert(20); MatyášJiří(15); BabarDipak Gorakh(5). Improving sensitivity of the polyurethane/CNT laminate strain sensor by controlled mechanical preload. In IOP Conference Series: Materials Science and Engineering. Bristol : Institute of Physics Publishing Ltd., 2016, p. Pages not specified.
ISSN 1757-8981. JI - Kompositní materiály

[94]NishitaniYosuke(10); MukaidaJun(10); YamanakaToshiyuki(10);
KajiyamaTetsuto(10); KitanoTakeshi(60). Thermal Properties of Hemp Fiber Filled Polyamide 1010 Biomass Composites and the Blend of These Composites and Polyamide 11 Elastomer. In Proceedings Of Pps-31: The 31St International Conference Of The Polymer Processing Society. Melville : American Institute of Physics, 2016, p. Pages not specified. ISSN 0094-243X. ISBN 978-0-7354-1360-3.CE - Biochemie

[95]BabayanVladimir Artur(20); KazantsevaNatalia(20); KožákováZuzana(20);
MachovskýMichal(20); SedláčekTomáš(10); PavlínekVladimír(10). Chemically blown polymer-magnetic foam: A potential lightweight radio absorbing material. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016,
p. not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[96]HanulíkováBarbora(60); UrbánekPavel(10); KuřitkaIvo(30). Prediction of vibrational spectra of poly[methyl(phenyl)silane]: A preliminary DFT study. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p.
not specified. ISBN 978-80-7454-590-0.CD - Makromolekulární chemie

[97]OlejníkRobert(30); MatyášJiří(30); SlobodianPetr(30); ŠpytálskýZdeno(10). Resistive crude oil sensor on the base of SIS copolymer/carbon allotropes. In Sborník konference PLASTKO 2016. Zlín : Univerzita Tomáše Bati ve Zlíně, 2016, p. not specified. ISBN 978-80-7454-590-0.JB - Senzory, čidla, měření a regulace

CONFERENCES, WORKSHOPS, EXHIBITIONS - ORGANIZATION

[98]ŠkodaDavidUrbánekPavelŠevčíkJakubMünsterLukášKuřitkaIvo. Facile microwave assisted synthesis of Co and Ni doped ZnO nanoparticles and their use in MEH-PPV nanocomposites. 2017, CA - Anorganická chemie

OTHERS

[99]PavelkováAlena(40); KucharczykPavel(15); CapákováZdenka(15);
ZedníkJiří(15); SedlaříkVladimír(15). Non-toxic biodegradable polyester urethanes based on PLA. NEWGEN Zlín Workshop, 2016, CD - Makromolekulární chemie

[100]FeiHaojie(50); SahaNabanita(15); BabayanVladimir Artur(5);
KazantsevaNatalia(15); SáhaPetr(15). Polyaniline/reduced graphene oxide/graphite wet film for flexible supercapacitors. 11th International Symposium on Electrochemical Micro & Nanosystem Technologies (EMNT2016), 2016, 99.CE - Biochemie

[101]FilatovaK. O.(50); SedlaříkVladimír(10); Di MartinoAntonio(10); GolovanA.(10); KrupskaT. V.(10); TurovV. V.(10). Chitosan-functionalized spherical nanosilica matrix as drug delivery system. 2016, CE - Biochemie

[102]KucekováZdenka(20); KašpárkováVěra(20); HumpolíčekPetr(20);
StejskalJaroslav(20); MoučkaRobert(20). Conductivity and Cytotoxicity of Solvent-extracted Polyaniline. Nature Inspires, Creativity, Engineers, 2016, 545.CD - Makromolekulární chemie

[103]SmolkováIlona(25); KazantsevaNatalia(25); VítkováLenka(25);
SáhaPetr(25). Interparticle Interaction Effect on Magnetization Dynamics of Multicore Iron Oxide Particles in Alternating. 2016, CD - Makromolekulární chemie

[104]Di MartinoAntonio(60); GuselnikovaA. Olya(10); KurtukovV. Viktor(10); Postnikov, p. Pavel(10); SedlaříkVladimír(10). Development of Theranostic Agents based on Iron Oxide-Gadolinium-Chitosan for Controlled Release. 2016, CE - Biochemie

[105]SahaNabanita(50); Shimoga D.Ganesh(5); MachovskýMichal(15); UrbánekMichal(15); SáhaPetr(10); Ronald N.Zuckermann(5). Porous soft materials: Function as a matrix for the development of multifunctional nanomaterials. Proceeding of International conference
on role of microscopy and allied techniques in the development of multifunctional and nanomaterials
, 2016, 26-28.JI - Kompositní materiály

[106]Shimoga D.Ganesh(50); SahaNabanita(20); Ramasubba ReddyPalem(20); SáhaPetr(10). Dielectric properties of aqueous rheum rhabarbarum-silver nanoparticles. Nanofis 2016 2nd international conference
Functional integrated nano systems
, 2016, 1.CE - Biochemie

[107]SalákováAlexandra(30); BinderMichael(10); NehybaAntonín(10);
SedlaříkVladimír(15); Kolářová RaškováZuzana(15); DrbohlavJan(10); 
RoubalPetr(10). Factors Influencing the Formation of Nisin and its Isolation from Whey and the Use of Antimicrobial Effects for Food, Cosmetic and Medical Applications. 2016, CE - Biochemie

[108]Di MartinoAntonio(50); SedlaříkVladimír(50). Chitosan : A versatile tool for drug and gene delivery. 2016, CD - Makromolekulární chemie

[109]GolovanAlina P.(5); KrupskaTatiana V.(5); FilatovaKaterina O.(65);
SedlaříkVladimír(5);  HumpolíčekPetr(5); BorisenkoMykola V.(5); PakhlovEugeny M.(5); TurovVladimir V.(5). Composite system amizon-silica and its properties. 2016, JI - Kompositní materiály

[110]HrabalíkováMartina(50); SedlaříkVladimír(50). Nisin immobilization into polyester based microspheres. 2016, JI - Kompositní materiály

[111]FilatovaKaterina O.(50); Di MartinoAntonio(40); SedlaříkVladimír(10). Surface Modification of Silica with Biodegradable Amphiphilic Polymer for Controlled Release Applications. 2016, JI - Kompositní materiály

[112]FilatovaKaterina(70); SedlaříkVladimír(30). Effect of Silica Surface Modification with Chitosan and Chitosan-g-polylactic Acid on Release Trend. 2016, CE - Biochemie

[113]SahaNabanita(60); BandphapadhyaSmarak(15); Ramasubba ReddyPalem(15); SáhaPetr(5); MadhuswetaDas(5). Bioadditive Containing Hydrogel Film: An Excellent Polymeric Food Packaging Material for Fresh Fruits and Vegetables. Polymers additives masterbatches compounds, 2016, 1-2.JI - Kompositní materiály

[114]Ramasubba ReddyPalem(40); SahaNabanita(20);
ShimogaGanesh(20); KronekovaZuzana(10); SáhaPetr(10).
Chitosan based silver nanocomposites: A novel biomaterial for life science applications. Abstract book - 3rd International Conference on Bio-based Polymers and Composites, 2016, 179-180.JI - Kompositní materiály

[115]StloukalPetr(60); SedlaříkVladimír(20); ChodákIvan(10); NovákIgor(10). The effect of plasma hydrophobization on the realase of Temozolomide from polyester and polylactic acid. 2016, CD - Makromolekulární chemie

[116]Amini MoghaddamMaliheh. Formation of polymer particles with supercritical CO2: A review. 2016, CD - Makromolekulární chemie

[117]Di MartinoAntonio(50); SedlaříkVladimír(50). Smart polysaccharides nanoparticles for controlled release of protein. 2016, JI - Kompositní materiály

[118]Di MartinoAntonio(50); KucharczykPavel(15); HumpolíčekPetr(10);
SedlaříkVladimír(15); KucekováZdenka(10). Improvement of Temozolomide stability by loading in Chitosan-carboxy enriched Polylactide nanoparticles. In vitro evaluation.. 2016, CD - Makromolekulární chemie

[119]ZatloukalMartin(100). Applied Rheology for Understanding Flow Instabilities in Polymer Processing. Annual Technical Conference - ANTEC 2016, Conference Proceedings, Indianapolis; United States; 23 May 2016 through 25 May 2016, 2016, CI - Průmyslová chemie a chemické inženýrství

[120]Shimoga D.Ganesh(30); Ramasubba ReddyPalem(20); SahaNabanita(20); 
ZandraaOyunchimeg(20); SáhaPetr(10). Eco-friendly plant mediated route to synthesize silver nanoparticles from garden rhubarb (rheum rhabarbarum). Nanofis 2016 2nd international conference Functional integrated nano systems, 2016, 1.CE - Biochemie

[121]ŠtoplováPetra(50); SedlaříkVladimír(50). The Optimization of Method for Preparing Microparticles. 2016, CD - Makromolekulární chemie

[122]HolčapkováPavlína(50); VojtáškováKateřina(25); SedlaříkVladimír(25). Binary polymer systems PLA/PEG for immobilization of bacteriocins. 2016, JI - Kompositní materiály

[123]NogolováLucie(60); SedlaříkVladimír(40). The Effect of Antimicrobial Agents on the Stability of Hydrogels. 2016, CD - Makromolekulární chemie

[124]Di MartinoAntonio(55); PavelkováAlena(15); KucharczykPavel(15);
SedlaříkVladimír(15). Novel PLA-Chitosan nanocomplexes for controlled and sustained release of DNA-Alkylating drugs. 2016, CE - Biochemie

[125]CvekMartin(30); MoučkaRobert(20); SedlačíkMichal(30); 
Babayan
Vladimir Artur(10); PavlínekVladimír(10). Shielding and magnetorheological performance of elastomers containing silane-modified carbonyl iron particles. 2016, JI - Kompositní materiály

PATENTS, UTILITY MODELS, INDUSTRIAL DESIGNS

[126]KazantsevYurii(25); BabayanVladimir Artur(15); Kazantseva
Natalia
(15); VilčákováJarmila(15); MoučkaRobert(15); SáhaPetr(15). Širokopásmový absorbér elektromagnetického záření a způsob jeho výroby. 2016,
BM - Fyzika pevných látek a magnetismus

[127]KimmerDušanVincentIvoFenykJanPetrášDavidZatloukalMartin;
SambaerWannes. Morfologicky optimalizované netkané textilie na bázi nanovláken. 2017,

[128]KazantsevaNatalia(20); SapurinaIrina(20); StejskalJaroslav(20); SáhaPetr (20); VilčákováJarmila(20). Hybridní feromagnetické plnivo a polymerní magnetický kompozit na jeho bázi. 2017, JI - Kompositní materiály

[129]SedlaříkVladimír(50); HrabalíkováMartina(10); StloukalPetr(10);
Sáha
Petr(5); TupýMichael(25). Koncentrát na bázi organické biologicky aktivní látky určený pro antimikrobní stabilizaci plastových povrchů. 2017, JJ - Ostatní materiály

[130]SedlaříkVladimír(30); Kolářová RaškováZuzana(40); Holčapková
Pavlína
(5); NogolováLucie(5); Šalaková, Alexandra(10); DrbohlavJan(10). Stabilizovaný polymerní prostředek obsahující nisin. 2016, CD - Makromolekulární chemie

[131]PalemRamasubba Reddy(30); Shimoga DineshGanesh(30); 
Saha
Nabanita(15); SáhaTomáš(15); SáhaPetr(10). Nanočástice stříbra se zlepšenými vlastnostmi, zejména pro ekologicky příznivé aplikace u senzorů. 2017,

[132]SedlaříkVladimír(50); HrabalíkováMartina(10); StloukalPetr(10);
SáhaPetr(5); TupýMichael(25). Koncentrát pro antimikrobní stabilizaci plastových povrchů vytvořený na bázi anorganické biologicky aktivní látky. 2017, JJ - Ostatní materiály

[133]LehockýMarián(5); StloukalPetr(5); SedlaříkVladimír(5);
HumpolíčekPetr(5); VeselAlenka(20); MozeticMiran(20); Zaplotnik,
Rok(20); PrimcGregor(20). Zařízení pro generování UV záření a způsob generování tohoto záření. 2017,

PROTOTYPES, FUNCTIONAL SAMPLES

[134]SlobodianPetr(40); OlejníkRobert(30); MatyášJiří(30). Senzor a vyhodnocovací jednotka pro detekci par NH3 tenkou vrstvou PANI. 2016, JB - Senzory, čidla, měření a regulace

RESEARCH REPORTS

 [135]PavlínekVladimír(10); WrzecionkoErik(30); MinaříkAntonín(30);
SmolkaPetr(30). Ohybový test SLM vzorků - bending test. Continental Barum s.r.o., 2016. not specified.

[136]PavlínekVladimír(5); ZatloukalMartin(95). Experimentální ohodnocení reologického chování plněných polypropylenů. Audia Plastics, s.r.o., 2016.
not specified.

[137]ZatloukalMartin(100). Analýza neizotermálních transientních elongačních
toků pro polymerní taveniny. Tetra Pak Packaging Solutions AB Malmö Sweden, 2016. Not specified.

[138]PavlínekVladimír(10); SmolkaPetr(30); MinaříkAntonín(30);
WrzecionkoErik(30). Ohybový test SLM vzorků. Continental Barum s.r.o., 2016. not specified.

[139]ZatloukalMartin(100). Optimalizace designu vytlačovací hlavy pro výrobu plastových korugovaných trubek pomocí FEM analýzy. Continental Automotive Czech Republic s.r.o. Hradecká 1092 506 01 Jičín 1, 2016. Not specified.

[140]PavlínekVladimír(10); SmolkaPetr(30); MinaříkAntonín(30);
WrzecionkoErik(30). Ohybový test SLM vzorků. Continental Barum s.r.o., 2016. not specified.

[141]KuřitkaIvo(5); StočekRadek(35); DattaSanjoy(60). Mischungsentwicklung Honda. Mubea Fahrwerksfedern GmbH, 2016. not specified.

[142]ZatloukalMartin(100). Aplikovaná reologie pro výtlačné vyfukování
polymerních materiálů. DuPont International Operations Sarl 2 Chemin du Pavillon Geneva Switzerland, 2016. Not specified.

[143]PavlínekVladimír(1); KratinaOndřej(99). Analýza lomového chování
pryže. PRL Polymer Research Lab., s.r.o., 2016. not specified.

[144]PavlínekVladimír(40); PlachýTomáš(30); SedlačíkMichal(30). Analýza mechanických vlastností a zatékavosti v prototypových formách.
MouldPro s.r.o. Zlín, 2016. Not specified.

[145]PavlínekVladimír(5); ZatloukalMartin(95). Reologické ohodnocení tokového chování polymerních vzorků. Continental Barum s.r.o., 2016. not specified.

[146]HausnerováBerenika(100); HnátkováEvaDvořákZdeněk. Zhodnocení vlastností karbidových prášků pro nový postup odstranění a sintering PIM technologií. Global Tungsten&Powders spol. s r. o., 2016. not specified.

[147]PavlínekVladimír(10); SmolkaPetr(50); WrzecionkoErik(40). Ohybový test SLM vzorků. Continental Barum s.r.o., 2016. not specified.

[148]PavlínekVladimír(5); ZatloukalMartin(95). Experimentální ohodnocení reologického chování plněných polypropylenů. Audia Plastics, s.r.o., 2016. not specified.

[149]ZatloukalMartin(100). Charakterizace nanostrukturovaných materiálů a výpočet jejich filtračních účinností v závislosti na velikosti filtrovaných částic. Spur a.s. Třída Tomáše Bati 299 763 02 Zlín Louky, 2016. Not specified.

[150]PavlínekVladimír(10); SmolkaPetr(30); MinaříkAntonín(30);
WrzecionkoErik(30). Ohybový test SLM vzorků - bending test. Continental Barum s.r.o., 2016. not specified.

[151]PavlínekVladimír(1); DattaSanjoy(15); StočekRadek(68); Kratina,
Ondřej(10); HnátkováEva(5); DvořákZdeněk(1). školení "First view in rubber material, processing and characterisation for beignners". Mubea Fahrwerksfedern
GmbH, 2016. not specified.

[152]SmolkaPetr(30); MinaříkAntonín(30); WrzecionkoErik(30);
PavlínekVladimír(10). Ohybové testy SLM vzorků. Continental Barum s.r.o., 2016. not specified.

[153]PavlínekVladimír(10); WrzecionkoErik(30); MinaříkAntonín(30);
SmolkaPetr(30). Ohybový test SLM vzorků - bending test. Continental Barum s.r.o., 2016. not specified.

[154]Zatloukal, Martin(100). Reologická simulace procesu výtlačného vyfukování polymerních materiálů. DuPont International Operations Sarl 2 Chemin du Pavillon Geneva Switzerland, 2016. Not specif